Application of digital rapid process implant template in implant surgery of maxillary anterior teeth area.

Abstract

Abstract:

Abstract： Objective To evaluate the effect of the application of digital rapid process implant template in implant surgery of maxillary anterior teeth area. Methods Totally six patients with maxillary anterior teeth missing who need implant surgery were collected and the implant template was made by digital rapid process technology and was used in implant surgery. Then the deviations of the implant body were measured. Results The surgery process was satisfactory. Slight postoperative reaction was observed，and 3-6 months after implant crown repair was successfully completed. In CT image the deviation of the neck and apical of the implant body was （0.71±0.17）mm and （0.85±0.19）mm， respectively. Conclusion The digital rapid process implant template is a very effective method in implant surgery of maxillary anterior teeth area.

Key words: rapid process technology , implant template, upper anterior teeth area

摘要：

目的评价数字化快速成型种植导板在上前牙区种植的临床应用效果。方法对2010年4月至2012年6月在河南大学第一附属医院口腔科就诊的6例上前牙缺失患者，拍摄螺旋CT及常规取超硬石膏模型，经过三维重建、模拟种植及数字化快速成型技术制作导板后，将该导板应用于手术中。术后再次拍摄螺旋CT并与术前的情况进行对比。结果 6例患者均应用该导板完成手术，手术效果满意。患者术后反应轻微，植入后3～6个月均顺利完成冠部修复，美观效果良好。经过术前、术后CT结果对比，种植体颈部的偏移为（0.71±0.17）mm，根部的偏移为（0.85±0.19）mm。结论数字化快速成型种植导板应用于上前牙种植，具有明显的技术优势与广阔的应用前景。

关键词: 快速成型技术, 种植导板, 上前牙区

CLC Number:

Ｒ78

SHI Guang-hui， REN Chun-fu，YANG Zhong-rui， ZHU Yong-cui， ZHAI Lei. Application of digital rapid process implant template in implant surgery of maxillary anterior teeth area.[J]. Acta Metallurgica Sinica.

时光辉，任春富，杨中锐，朱永翠，翟蕾. 数字化快速成型种植导板在上前牙区种植的临床应用研究[J]. 中国实用口腔科杂志.

References

［1］诸森阳，蔡玉惠.快速原型技术在口腔医学中的应用进展［J］.口腔医学，2012，32（12）：755-756.

［2］李志刚，郝智莉，冷卓，等.计算机辅助设计和制造（CAD/CAM）的种植手术导板的应用［J］.现代口腔医学杂志，2012，26（4）：237-241.

［3］ Rousseau P．Flapless and traditional dental implant surgery：an open，retrospective comparative study［J］. J Oral Maxillofac Surg，2010，68（9）：2299-2306．

［4］ Kero T，Pettersson A，Fäldt J，et al. Virtual variation simulation of CAD/CAM template-guided surgeries performed on human cadavers： Part II. ［J］. J Prosthet Dent，2010，104（1）： 48-55.

［5］ Marchack CB. CAD/CAM-guide implant surgery and fabrication of an immediately loaded prosthesis for a partially edentulous patient ［J］. J Prosthet Dent，2007，97（6）：389-394.

［6］ Balshi SF，Wolfinger GJ，Balshi TJ. Surgical planning and prosthesis construction using computer technology and medical imaging for immediate loading of implants in the pterygomaxillary region ［J］. Int J Periodontics Restorative Dent，2006，26（3）：239- 247.

［7］赵俊武．制造技术的一次重大突破——快速原型与制造技术［J］电子机械工程，1999，82（ 6）：2-8．

［8］ Sinn DP，Cillo JE Jr，Miles BA．Stereolithography for craniofacial surgery［J］.J Craniofac Surg，2006，17（ 5）： 869-875．

［9］ Vercruyssen M， Jacobs R， Van Assche N， et al. The use of CT scan based planning for oral rehabilitation by means of implants and its transfer to the surgical field： a critical review on accuracy ［J］. J Oral Rehabil， 2008， 35（6）：454-474.

［10］ Oguz O， Turkyilmaz I， Ersoy AE， et al. Clinical accuracy of 3 different types of computed tomography-derived stereolithographic surgical guides in implant placement ［J］. J Oral Maxillofac Surg， 2009， 67（2）：394-401.

［11］ Schneider D， Marquardt P， Zwahlen M， et al. A systematic review on the accuracy and the clinical outcome of computer-guided template-based implant dentistry ［J］. Clin Oral Implants Res， 2009， 20（Suppl 4）：73-86.

[1]	WANG Mei-qing. Science of dental occlusion：current understanding and prediction. [J]. Acta Metallurgica Sinica, 2015, 8(1): 1-4.
[2]	KANG Hong，ZHANG Xue. Basic concept of occlusion and research status. [J]. Acta Metallurgica Sinica, 2015, 8(1): 5-8.
[3]	LIU Mu-qing，FU Kai-yuan. Condylar position and its role in the diagnosis and treatment clinically. [J]. Acta Metallurgica Sinica, 2015, 8(1): 8-12.
[4]	WANG Lin-xia，MENG Yu-kun. The issues of occlusion in implant dentures. [J]. Acta Metallurgica Sinica, 2015, 8(1): 13-16.
[5]	GE Zi-ming，ZHAO Hai-jiao，YANG Xue，PAN Ya-ping. Effect of smoking on alveolar bone defect in patients with chronic periodontitis. [J]. Acta Metallurgica Sinica, 2015, 8(1): 17-21.
[6]	ZHANG Bo，SHAO Lei，ZHAO Bao-hong，DENG Chun-fu，SHANG De-hao，ZHANG Chong，WANG Dan-ning. Evaluation on short-term clinical effect of splinted short implants in mandible of posterior region. [J]. Acta Metallurgica Sinica, 2015, 8(1): 22-27.
[7]	XIE Hui-lan，XU Jun-wu，CAO Bai-yu，ZHENG Ling-jian. In vitro study of sealing ability of mineral trioxide aggregate and resinous inlay in repairing the large area of molar furcation. [J]. Acta Metallurgica Sinica, 2015, 8(1): 28-31.
[8]	ZHANG Gui-rong，CHEN Luo-ping，WANG Xue. Effect of fluid shear stress on the expression of LEF-1 mRNA in human periodontal ligament cells. [J]. Acta Metallurgica Sinica, 2015, 8(1): 32-35.
[9]	MA Hong-mei*，LI Si-wen，JIA Xing-ya，WANG Li-sha. Clinical experience in Cerec AC chairside immediate all-ceramic restorations in 83 cases. [J]. Acta Metallurgica Sinica, 2015, 8(1): 36-39.
[10]	WU Qi，LENG Ying，DUAN Chang-hua，QIU Feng. Research on the effect of initial periodontal therapy on drug-induced gingival overgrowth by phenytoin. [J]. Acta Metallurgica Sinica, 2015, 8(1): 40-42.
[11]	ZHANG Yu，AI Li-si，LIN Li. Research progress in thallus surface virulence factors and pathogenesis of Porphyromonas gingivalis. [J]. Acta Metallurgica Sinica, 2015, 8(1): 43-47.
[12]	CHEN Wen-li，LIU Lin. Research progress of vertical control of teeth by corticotomy in the orthodontic clinic. [J]. Acta Metallurgica Sinica, 2015, 8(1): 48-51.
[13]	LIU Xue-mei，LIU Yao，CHEN Xu. Research advances in the interactions between dental tissue-derived stem cells and inflammation. [J]. Acta Metallurgica Sinica, 2015, 8(1): 52-55.
[14]	CHEN Wen-ping，HUANG Shao-hong. Preventive measures of environmental infection propagation in department of stomatology. [J]. Acta Metallurgica Sinica, 2015, 8(1): 56-60.
[15]	. Keywords：dental implant；onlay bone graft；bone augmentation [J]. Acta Metallurgica Sinica, 2015, 8(1): 61-64.